Відео

yes the cable is included i have an unboxing video but yes its the common usb to c style

afr and an srt scan gauge

@@Mattsneedforspeed okay thanks man..if I get a Oil pressure guage i could tap the sensor into the head right?

@@sethalexis6741 you can used the port on the head it will read lower then actual pressure warm idle will be 6-12psi once it’s in and installed and you know what it reads then if it changes you know there’s an issue

@@Mattsneedforspeed thanks man

i see what iv got here.. i should have one here

i have 1 left, I don't do shipping on them

it sounded worse then what it actually was, with just this header and stock exhaust it made this engine sound terrible after the mpx catback was added it gave it a deeper better sounding tone

yes i still have some available i have email @yahoo.com and facebook both same name as youtube

it eats away at them till there's nothing left

it already found a home..

Its still looking for a new home but its something I don't ship as its too large

getting to rebuilding this mustang was actually very enjoyable for me as i've owned it over 23 years in the first years of ownership people complained it was too loud now every where I go I get thumbs up and nice car and get asked if ill sell it at gas stations I'm so happy i never let it go..

Sounds like your map sensor is bad. Replace it.

same, this one was just too far gone to save but will help others live on..

That’s a good idea I have bunch of stock ones here see if it’s rebuildable and what parts would be needed

@@Mattsneedforspeed awesome I’ll be waiting for it, thank you

Right poor car, it was tough and a dirty mess to pull parts from there was a lot that was not savable😢

Same here..I got a black 04 I'm about 2 years into and 70 percent done with rebuilding the entire car pretty much

right some of the ones ive fixed up and saved with in 2 years were trashed owners went crazy with spray paint, cut the cross hairs out of the bumpers and just destroyed them makes me not want to get rid of my 2 that i currently own..

can source bolts from other neons or dodge cars at a junk yard of the similar year and make some can be found a hardware store home depo ect have to match up what will work or I do have a bunch here and can share can email @yahoo or on facebook same name as this youtube i can ship you what you need

​@Mattsneedforspeed Thanks for everything you do! Making these videos. Sharing experience. Answering my questions. The only ppl who have worked on my car was a dodge dearship when the car was under warranty. And yes the messed up my clutch. Bent one of my wheels and some missing bolts I'm finding now. From now on I'll be doing the work on it. So trying to educate myself the best I can. You have helped me to get my car running and now registered after sitting 9 years. 59k miles. No rust. Paint like new. Perfect interior. Let's hope I dont F it up lol. Being patient and careful.

its not that loud it has a good sound also, the turbo xs is louder and has a higher pitch, all bov that vent to the outside will all make noise that's why we do that mod to boosted cars its a better hard pipe can see higher boost levels and is needed when upgrading to a big turbo setup

Id like to do that with every car but i need to get a better camera set up there is others that feel the same on the voting there the car looked great and like that flag in the back seat too lol ive got Saturday video to edit out here too

yes I am I'm near Harrisburg pa

i just got one in, they are something that need picked up as its size its too big to ship

it was good seeing you at the show also..

yup make ya famous ...

i have an email @yahoo.com and a facebook page same name as the youtube

can email @yahoo.com or message on face book page both the same name as this UA-cam i have a few left from the show

was a good show a little hot and congratulations on the award

this show was in Carlisle pa was a busy week end. carlisleevents.com/

can email me @yahoo.com or message me on face book same name as may youtube page i can send you one

@@Mattsneedforspeed oh I follow you on both...

any smoke at idle out the dip stick or breather with the vacuum line disconnected from the pvc valve ? if so look into rings or cylinder wall ware, can do a cylinder leak down test too

Thanks I’ll give that a try. I’ve been avoiding leak down test lol

with not knowing this truck i just pulled everything to inspect them but the replace with new every 2 years is a good idea the bolts are cheap so every 20-30k miles its $4.00 in added service

check out my srt4 parts clean up video its about 2 years old but i've still got lots here

just don't look too close, unless your at a night car meet..

its pretty scary looking

get to work need to be out enjoying that thing...

@@Mattsneedforspeed was waitin on you locally.. but I guess u not interested so I'll send it somewhere else

@@S.K.2.4 I do what I can to help out with what time I have, If you have someone and they need something or have questions let me know, I’ll be trying to help some in need out here after the Chrysler Carlisle car show this coming weekend July 12 through the 14th

@@Mattsneedforspeed no problem my parents b at Carlisle 69' super bee & 80' Mirada.. last I talked to u on messenger said u didn't have room until next work done .. my # on there so when u ready my car 05' silver 50trim from Virginia

for some of it i give an A for effort, but all just bad bad work,, poor car

All just for fun too

this might work differently on an automatic

can be everything has a price...

if I had to guess i would say yes all i did was move it around I should have named this car the ticking time bomb just never know whats gonna fail next due to the poor work that was done some times you just cant fix everything..

tight they not really anything that you need to be picky about torquing..

the stock knob will need to be broken to remove it its glued together from factory the mpx knob is reusable as its milled out of aluminum and the cap is held on with an o-ring and has a hole to be able to pry it off you will need a new oem knob

this has the same vibe as the car extended warranty calls or the ones wanting to give me free stuff if i give them my bank info no thanks dear...

@@Mattsneedforspeed no no no. Its my professional work man. Sorry for reach here but i have no way to reach you. I see you make content and it was too good but those content are not grow in larger and targeted Audience base. As a SEO Expert I just want to know you that. How can you example me like that. I respect my profession. 🥺💔 very disappointing

this car is nice and runs well

I never thought to weight it but the large cast stock pipe and cat if i were to guess weigh more If your looking for one i have this one available light use

@@Mattsneedforspeed Unfortunately, I am the type of person who also has to consider the weight difference as well (considering the cost). I have not found any weights yet otherwise on stock vs the mpx unit(s).

After playing email tag with someone from Modern Performance, it seems as though it may be a 5-8lb weight difference. For some reason, they (Modern Performance) do not compare said differences.

@ 3:28 i show there's 3 different length bolts and the 4th is 2 bolt studs that get the nuts for the snubber